Find a contact near you by visiting www.gewater.com and clicking on “Contact Us”.
* Trademark of General Electric Company; may be registered in one or more countries.
©2013, General Electric Company. All rights reserved.
FS1262EN.doc Nov-13
AG Series
Standard Brackish Water RO Elements
The A-Series, family of proprietary thin-film reverse
osmosis membrane elements are characterized by
high flux and high sodium chloride rejection. AG
Standard Brackish Water Elements are selected when
high rejection and operating pressures as low as 200
psi (1,379 kPa) are desired. These elements allow mod-
erate energy savings, and are considered a standard in
the industry.
Table 1: Element Specification
A-Series, Thin-Film Membrane (TFM*)
Average
permeate flow
gpd (m
3
/day)
1,2
Average NaCl
rejection
1,2
Minimum NaCl
rejection
1,2
1
Average salt rejection after 24 hours operation. Individual flow rate may vary
+25%/-15%.
2
Testing conditions: 2,000 ppm NaCl solution at 225 psi (1,551 kPa) operating
pressure, 77°F (25°C), pH 7.5 and 15% recovery.
Figure 1: Element Dimensions Diagram – Female
Figure 2: Element Dimensions Diagram – Male
Comments to this Manuals